Sign In | Join Free | My chinalane.org
China Pego Electronics (Yi Chun) Company Limited logo
Pego Electronics (Yi Chun) Company Limited
Pego Electronics-Focus on developing and promoting IEC lab testing equipments
Verified Supplier

7 Years

Home > Environment Test Equipment >

IEC60529 Clause 14.2.3 and Clause 14.2.4 Figure 5 IPX3 and IPX4 Ingress Protection Testing Spray Nozzle Waterproof Tester

Pego Electronics (Yi Chun) Company Limited
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now

IEC60529 Clause 14.2.3 and Clause 14.2.4 Figure 5 IPX3 and IPX4 Ingress Protection Testing Spray Nozzle Waterproof Tester

  • 1
  • 2

Brand Name : Pego Electronics

Model Number : IPX34AS

Certification : Third-Lab Calibration Certificate

Place of Origin : China

MOQ : 1 set

Price : Negotiation

Payment Terms : T/T,PayPal

Delivery Time : 20 business days

Packaging Details : woodencase

Reference standard : IEC60529, IEC61851, IEC62196-1

Configuration : spray nozzle, control chamber

Material of nozzle : brass

Application : for testing household appliance, luminaire, auto parts and charging station

Working power : 220V/50Hz

Contact Now

IEC60529 Clause 14.2.3 and Clause 14.2.4 Figure 5 IPX3 and IPX4 Ingress Protection Testing Spray Nozzle Waterproof Tester

1. Introduction

The ipx34 spray nozzle waterproof tester is designed and manufactured according to IEC60529 clause 14.2.3 and clause 14.2.45 figure 5, IEC60598-1, GB4208, GB7000.1, GB17761 standards. It is suitable for waterproof testing of outdoor electrical and electronic products in terms of rain and water spray, and for waterproof testing of products by certification and testing agencies and manufacturers. The shower is mainly composed of a brass nozzle, a movable water baffle, a counterweight, a pressure gauge and a stainless steel valve. The equipment is consisted by spray nozzle, water tank and control box.

2. Standard

IEC60529 Degrees of protection provided by enclosures (IP Code) Figure 5

IEC60598-1 Luminaires - Part 1: General requirements and tests

ISO20653 Road Vehicles - Degrees of protection (IP-Code) - Protection of electrical equipment against foreign objects, water and access

3. Parameters

Model

IPX34AS

Outer size (L*W*H)

870mm*600mm*950mm (control box)

370mm*115mm*165mm (spray nozzle)

Spray nozzle diameter

102mm

Number of holes

121

Hole diameter

Φ0.5mm

Holes position

1 hole at center

2 inner circles of 12 holes at 300 pitch

4 outer circles of 24 holes at 150pitch

Outer diameter of water inlet

Φ16mm

Outer diameter of water pipe

Φ28mm

Flow rate

10L/min±5%

Flowmeter adjustment method

Manual adjustment

Water pressure range

50-150Kpa

Flowmeter display

Glass flow meter

Capacity of water tank

150L

Working power

220V/50Hz

Water source

1. The user is required to configure a water source for the equipment at the installation site, with a water pressure not less than 0.2Mpa, and install a 4/8 inch faucet.

2. The faucet is not more than 2 meters away from the equipment

Requirement for the site

The ground is level, the drainage is unobstructed, the ground and walls are waterproofed, and the floor drain or drainage ditch is set

4. Figure:

IEC60529 Clause 14.2.3 and Clause 14.2.4 Figure 5 IPX3 and IPX4 Ingress Protection Testing Spray Nozzle Waterproof Tester


Wholesale IEC60529 Clause 14.2.3 and Clause 14.2.4 Figure 5 IPX3 and IPX4 Ingress Protection Testing Spray Nozzle Waterproof Tester from china suppliers

IEC60529 Clause 14.2.3 and Clause 14.2.4 Figure 5 IPX3 and IPX4 Ingress Protection Testing Spray Nozzle Waterproof Tester Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Pego Electronics (Yi Chun) Company Limited
*Subject:
*Message:
Characters Remaining: (0/3000)