IEC60601-1 Test Probe Kits for Verification to Openings in Enclosures of ME equipment
1. Introduction
The test probe kits are meet the requirement of IEC60601-1, includes standard test finger, test pin, straight unjointed test finger, test hook and metal test rod, they are applied to verify the accessibility of living or mechanical hazardous parts and openings in enclosure of medical electrical equipment.
2. Specification
| Name | Figure number | Parameter |
| Standard test finger (test probe B) | IEC60601-1 clause 5.9.2.1 and figure 6 IEC60950-1 figure 2A IEC61032 figure 2 | Purpose:for identifying the accessible parts of ME EQUIPMENT Specification: 1). Diameter of dactylogryposis: Φ12mm 2). Length of dactylogryposis: 80mm 3). Diameter of baffle. Φ50mm 4). Length of baffle: 100mm 
|
| Straight unjointed test finger with 30N force | IEC60601-1 clause 5.9.2.1 IEC60950-1 clause 2.1.1.1 | Purpose: for verifying the openings preventing the entry of the standard test finger Specification: the size is as same as test probe B, but without joints, 30N force is applied. 
|
| Test Hook | IEC60601-1 figure 7 IEC60065 clause 9.1.7 and figure 4 | Purpose: for verifying the openings of ME EQUIPMENT in question Specification: 1). Length: 180mm 2). Width: 8mm 3). Length of hook: 5mm 4). Thickness: 1mm 5). Material: SUS304 stainless steel 
|
| Test Rod | IEC60601-1 clause 8.4.2 d) | Purpose: for verifying the opening of internal parts that can be touched Specification: 1). diameter: 4mm 2). Length: 100mm 3). Material: metal rod, nylon handle 4). Recommend force applied: 0N, 10N |
| Test pin (test probe 13) | IEC60601-1 clause 8.4.2 d) and figure 8 IEC60950-1 figure 2B IEC61032 figure 9 | Purpose: for verifying the opening of internal parts that can be touched Specification: 1). Diameter: Φ3mm (head), Φ4mm (tails) 2). Length of probe: 15mm 3). Diameter of baffle: Φ25mm 4). Thickness of baffle: 4mm 
|
| Ball Pressure Test Apparatus | IEC60601-1 clause 8.8.4.1 and figure 21 | Purpose: for verifying the insulation of ME EQUIPMENT resistance to heat Specification: 1). Ball diameter: 5mm (R2.5mm) 2). Test Pressure: 20N±0.2N 3). Material: Stainless Steel 4). Sample supportor: Φ50mm-length 100mm, cylinder sharp (configure with a hole to insert thermocouple) 
|
3. Frequently Asked Questions
1). How can we apply force during the test?
Pego: There are two methods for user to apply the force during the test: 1. User can choose the test probe with built-in thruster, the thruster is built-in the handle, just push the handle, the appropriate force can be applied. 2. The probe can work with a force gauge to apply force. The probe configured with a connector at the tail of the handle.
Normally, the recommended force applied to test is 10N, but in some product standards, the recommended force will be up to 50N.
2). How does the probe connect with a continuity indicating circuit?
Pego: The probe will come with a wire to connect with a continuity indicating circuit. User can create a continuity indicating circuit by themselves, or buy aN electrical indicator from Pego.
3). How to store and maintain the test probes in daily life?
Pego: The probes will come with a protective case, When not in use, place it in the case.
4). How do you prove that the probes meet the relative standards?
Pego: User can ask for the calibration certificate issued by ISO17025 authorized lab, but the price of the calibation certificate will be charged additionally.
Product Tags:
|
|
IEC60601-1 Test Probe Kits for Verification to Openings in Enclosures of ME equipment Images
|
